If you are using the setup presented above and the Arduino Nano IoT 33 flash the code in data_logger.ino ... This is when we will 'learn' what the current looks like when the vacuum runs wihtout a ...

Only require an Arduino ... Nano 5V Only required if you need more than 500mA power, else the Nano power supply should be enough x4 temperature sensors (or any analog device as input) x3 PWM mosfet ...

It's programmed using the Arduino IDE, so most of the sketches built into the software can be tested with the Nano. The board also operates at 5V ... as normal input and output pins or as their ...

[Faransky] has created a very impressive Arduino ... s output. To wrap up the build, he added a 2000mAh 3.7V Li-Ion battery and TP4056 charger, with a DC-DC boost converter to get 5V for the ...