The best solution is a drybox; a sealed filament container, usually with some desiccant inside. But in a pinch, [Spacefan]’s quick and dirty $0 drybox solution is at least inspiring in terms of ...

and the small-scale test with the RS1 showed that with a full filament spool in the box, humidity inside the container would only drop very gradually as more and more moisture replaced what was ...

Install the [a]_Buffer_Latch_x4.STLs around the perimeter of the Buffer_Case.STL using a piece of filament as the hinge press the bearing ... Measure approximately 222mm from the bottom of the ...

Brushes have the same nozzle height. After cutting the ERCF filament, clean the nozzle. Filament change andthen filament cutting performed → Move to the rear filament container position and remove the ...